jammin x2 truggy conversion??

[rccrazy]

I'm a newb to the truggy scene-but got a jammin x2 truggy-bought the rc monster parts needed 2 convert it-question I hav is iv got a mm 2650 motor-& esc,was used in a buggy-will this wrk on the truggy without any issues?or would it b wise to get a differnt motor,iv got a few 4cell turnigy 5.0 30c batts-and losi 18.5 5cell, to run it for now-any info-suggestion on batts or motor would be greatly apperciated-want 2 do it right the 1st time-

[scarletboa]

Originally Posted by rccrazy

I'm a newb to the truggy scene-but got a jammin x2 truggy-bought the rc monster parts needed 2 convert it-question I hav is iv got a mm 2650 motor-& esc,was used in a buggy-will this wrk on the truggy without any issues?or would it b wise to get a differnt motor,iv got a few 4cell turnigy 5.0 30c batts-and losi 18.5 5cell, to run it for now-any info-suggestion on batts or motor would be greatly apperciated-want 2 do it right the 1st time-

you could potentially use that motor if you were to gear conservatively and keep a close eye on temps.

i think your best bet would be to get a castle 1515 2200kv motor or even a 1518 1800kv motor if you to gear for higher speeds.
i have a spare 1518 i could sell if you are interested.

[superek4]

Originally Posted by rccrazy

I'm a newb to the truggy scene-but got a jammin x2 truggy-bought the rc monster parts needed 2 convert it-question I hav is iv got a mm 2650 motor-& esc,was used in a buggy-will this wrk on the truggy without any issues?or would it b wise to get a differnt motor,iv got a few 4cell turnigy 5.0 30c batts-and losi 18.5 5cell, to run it for now-any info-suggestion on batts or motor would be greatly apperciated-want 2 do it right the 1st time-

2650kv is best with 3s but due to it's a buggy motor. It may over temp in a truggy.

If u insist to use it u hv to gear it low with 4s.