RC-Monster Forums  

Go Back   RC-Monster Forums > RC-Monster Area > General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
For sale: Revo 3.3 Brushless Mamba Monster 2200kv, Revo w/ os tz .18, Rally w cvd's
Old
  (#1)
IrishChamp
RC-Monster Carbon Fiber
 
Offline
Posts: 81
Join Date: Mar 2012
For sale: Revo 3.3 Brushless Mamba Monster 2200kv, Revo w/ os tz .18, Rally w cvd's - 09.09.2012, 02:59 AM

First up I'd like to say that I am POSSIBLY interested in trades, however no nitro. Something different than what I have, a nice crawler scale or 2.2, x ray tc, thunder tiger MT4 G3, a nice heli, etc.
These are all adult owned, I'm 32 and I'd like to believe that I take pride in and treat my vehicles well when I have time to enjoy them. :)
Prices are obo, however I think they are reasonable as is, please let me know if they seem off.

First up is my tekno converted brushless revo 3.3 with a Castle Creations Mamba Monster 2200kv combo and castle link, brand new hpi terra pin wheels and tire, rpm front arms, forward only conversion transmission locked in 2nd gear, new*HK15298B High Voltage Coreless Digital MG/BB Servo, external Novak Bec (rated*to 7s lipo), new 4s 5000mah Zippy Flightmax 30c battery and new Hummer SUT body with protective film still on, windows taped ready for paint.
As I stated, body is brand new, battery has had one 5 minute use, literally only use 465mah out of it. :) motor and esc have about 6-10 4s packs through them, geared for 45mph, temp never got over 130 on either. I replaced the esc's fan with a better one and wired it to be on all the time so the esc stays really cool! The other nice thing about this is you know if the fan fails or gets jammed with rock :)
Also included is a traxxas rx and tx.
I recently filled shocks and diffs with fresh fluids, front diff 30k, rear 50k, shocks I don't remember but I set springs and oil based on info I found for revo sponsored racers setups. Also, a little sde note, shocks are the ones with titanium coated shafts Pinion is a hardened 15t, spur is 36t hardened steel as well.
Servo:
http://www.hobbyking.com/hobbyking/s...dProduct=22525
BEC:
http://www.shopatron.com/products/pr...ber=5463/135.0
Price:






*




I'll still need to take pictures of the following but here are the basics.

Next up is my Reno 3.3 with Os tz .18, sway bars, crime fighter tires , rechargeable rx battery pack, upgraded lighter smaller rx, battery holder, dual 2055 steering servos ofna 063 side pipe ready ready to be installed. Reverse servo has been removed but trans has reverse.
Os tz .18 has light use, I send back the origional tz .18 for warranty repair and they sent back a new engine. While I was waiting I moved on. I did disassemble it, clean and seal it but never put more than 1 gallon max, probably less through it. I broke it in wrapping and pre heating it with a hair dryer using os's guidelines.
Clutch is upgraded, I forget the details but it's MUCH better at managing the os's power, engaging precisely and firmly and not getting fried.
Price:

Next up is my Kent Block Rally VXL with upgraded TGY-390DMH High Performance Digital Servo, cvd/dog bones and titanium links (I believe) it's currently geared for 47mph and stays a descent temp with mixed driving. I got it on trade and I've never overheated it, it runs great amd temps are normal for the Rally VXL's.
Servo:
http://www.hobbyking.com/hobbyking/s...dProduct=11627
Price:
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com