new diff setup questions?

[supermaxx4190]

hey there,

i think im going to UE 6 spiders and im not sure what diff oil to run. i run the 8L on 12 cells. also, i run 16/72 gearing, what would be the equvilant for the UE diffs. i would also like to know the formula to find gearing from stock diffs to UE diffs if anyone knows. thanks

Isaac

[RC-Monster Mike]

I use 5000 weight in the diffs (front and rear). Some run stiffer oil in the front for better on power steering, but I like off power steering (just the way I drive). Basically, drop add two teeth to your pinion when going to the UE diffs for a similar ratio.

[Chase023]

Can Anyone spare some shims for the UE Diffs??

I need a few of those 0.010 shims

[Serum]

If your interested, i can find a partnumber of a 8 mm shimset (.1, .2 and .3 mm thick, 10 of each) it's from kyosho.

And i found a shim set from Tamiya of 10 mm shims..

You can buy the setup kit from UE as well.

[supermaxx4190]

im thinking 10000 in front and 7000 in rear. how would this be?

[RC-Monster Mike]

It would work very well. It would pull harder than the 5000 out of the corners, and have slightly more on power steering (and slightly less off power steering).

[supermaxx4190]

i got them today. they have 7k front and 5k rear. think that wil be good?

[RC-Monster Mike]

That will work very well.