 |
|
|
|
|
|
 |
 |
MGM ESCs initial setup - beeps not happening.. |
 |
|
 |
|
(#1)
|
|
Guest
Posts: n/a
|
MGM ESCs initial setup - beeps not happening.. -
02.13.2008, 05:25 AM
Hi Guys,
Managed to get the ESC hooked up now and trying to initialise the ESC. I pull the throttle all the way forward and switch on the ESC and wait there for 10 seconds for the 3 expected beeps.. but nothing! I can see the ESC powered up and comms with my PC is fine. Any pointers? Thanks! |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Titanium
Offline
Posts: 1,025
Join Date: Jan 2007
Location: Prague, Czech Republic
|
02.13.2008, 05:26 AM
do you have motor connected? ESCs beep through the motor :)
V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo *EX-10 Eurus* |
 |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 72
Join Date: Apr 2007
|
02.13.2008, 10:07 AM
You have probably got the signal to your esc backwards. If you servo reverse the throttle on your radio, and reverse two of the wires on the speed control to the motor, it will probably get you corrected.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
Guest
Posts: n/a
|
02.13.2008, 10:14 AM
Cool! Followed your instructions and it works! I reset-ed my servo settings on my m11 and switched 2 wires on the speed control, the motor beeps as required now. Thanks myndseye!
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
