Maybe my next project....1/5 scale brushless

[ssspconcepts]

I have been waffling on what my next brushless project should be...this just might be it.

http://www.youtube.com/watch?v=XQ1m2bSVMao

Pretty cool video...I wonder what type of ESC and motor they are using?

Has anybody here done a 1/5th scale brushless project? Pics? Vids? Setup specs?

[aqwut]

FineDesign has Brushless 1/5th Firehammer M/T...

[ssspconcepts]

Originally Posted by aqwut

FineDesign has Brushless 1/5th Firehammer M/T...

Looks cool...but I think the MCD stuff is better quality than the FireHammer. Opinions?

[aqwut]

I'm not sure about the MCD quality.... I've never had one... but I'm pretty happy with the firehammer M/T, it's uses most of the parts from the FG Marder.. only thing that sucks about the firehammer is the 2WD, and the 4WD kits costs a lot for the FG Marder... but the MCD stuff sure are expensive....

[ssspconcepts]

Originally Posted by aqwut

I'm not sure about the MCD quality.... I've never had one... but I'm pretty happy with the firehammer M/T, it's uses most of the parts from the FG Marder.. only thing that sucks about the firehammer is the 2WD, and the 4WD kits costs a lot for the FG Marder... but the MCD stuff sure are expensive....

Hopefully some others on here will reply with their insights as to the quality of MCD products. I have seen them at a LHS and they appear impressive, but I have zero experience with them. I wonder what kind of ESC and motor they used....

[BL_RV0]

i bet it was a LMT 2280 hi-amp.

[I Trust Tyler]

Originally Posted by ssspconcepts

Has anybody here done a 1/5th scale brushless project? Pics? Vids? Setup specs?

I'm actually really close to finishing my 1/5th scale brushless sedan

[tashpop]

that looks like its mostly maxx parts. looks like a fun project though

[I Trust Tyler]

definitely fun, i have a 1/5th scale car for 400 bucks and it only weighs 12 pounds!

[tashpop]

i found an interesting esc. i don't know if its commonly known, but it looks cool.
120amp
45 cell
15 lipo
https://www.fxaeromodels.com//produc...oducts_id=3957

i don't know anything about the power jazz esc's, but aren't they all able to be programed for car use?

[ssspconcepts]

Originally Posted by tashpop

i found an interesting esc. i don't know if its commonly known, but it looks cool.
120amp
45 cell
15 lipo
https://www.fxaeromodels.com//produc...oducts_id=3957

i don't know anything about the power jazz esc's, but aren't they all able to be programed for car use?

I am familiar with Kontroniks but not that controller. Specs are interesting though...

[aqwut]

I think Lutach has one of those...

[lutach]

Originally Posted by aqwut

I think Lutach has one of those...

I have almost all the Kontroniks, but not the PowerJazz. I'm trying to get Mike (Kontronik Mike) to make the PowerJazz for car use, but it might be out of the question. I have the Jeti SPIN-200, Actronic 120 and 75. My own 15S brushless ESC might be done sometime next year. I have other sources for HV ESC though.

[ssspconcepts]

Originally Posted by lutach

I have almost all the Kontroniks, but not the PowerJazz. I'm trying to get Mike (Kontronik Mike) to make the PowerJazz for car use, but it might be out of the question. I have the Jeti SPIN-200, Actronic 120 and 75. My own 15S brushless ESC might be done sometime next year. I have other sources for HV ESC though.

Are there any HV ESCs that are suitable for 1/5 scale car applications straight out of the box?

[lutach]

The Schulze 40.160, Actronic 120, BK might come out with some new controllers and mine if the engineer gets the programing right. I'm also talking with 2 factories and one for sure will have 2 HV available (12S and 15S) and the other is still thinking about it.