FLM Bulkless (Run dry or oil em?) - RC-Monster Forums

Hernz · **FLM Bulkless (Run dry or oil em?) -** 08.28.2007, 01:21 AM

hey guys i picked up a set of FLM bulkless a while ago and its time to put em in. i recieved them without oil or grease.

do i run these dry or do i put diff oil in them?

any suggestions for wt? i'll just be bashing. i have titans but most likely getting the novak 4.5

Serum · 08.28.2007, 01:30 AM

The diffs (ringgear/pinion) are used with grease, the internal gears of the diffs are used with silicone oil.

Thread moved to FLM.

Hernz · 08.28.2007, 02:40 AM

thanks for clarifying serum

08.28.2007, 08:41 AM

I use White lithium grease on the ring/pinion gear and Ofna Green Stuff Differential grease for inside the diff cups.

http://www2.towerhobbies.com/cgi-bin...?&I=LXESC0&P=7

wallot · 08.28.2007, 08:47 AM

I use Protech Speed greese on pinion/bevel gears and oils inside.Oil can completely change handling of the truck. After trial/error i ended up with 7k in front and 10k in rear.

Serum · 08.28.2007, 02:59 PM

That green stuff is a horror for (most) o-rings. with 1/8th diffs, you are better off using silicone inside the diffs.