Thoes of you using Zippy packs what balencer are you using?

[C-5Quad]

The question says it all..........I currently have a Hyperion charger eos0606I

I have 2 zippy packs on order and am wondering where to get Hyperion 3s plugs that I can have soldered up to make an adapter for balancing...I have the jst plugs to hook up to the batteries just need Hyperion end so I don't cut and swap plugs on the lipo.

[brushlessboy16]

Maxamps sells the plugs, but the Align Taps that come with the zippys can be easily modified to fit with the use of an exacto knife or razor.

[lincpimp]

Here ya go, just use this board with your charger : http://www.allerc.com/product_info.p...oducts_id=3159

[hootie7159]

I use the blinky and re common sense rc lipo balancer/voltage reader...both are simple and effective ESP the common sense rc one

[JThiessen]

Originally Posted by lincpimp

Here ya go, just use this board with your charger : http://www.allerc.com/product_info.p...oducts_id=3159

Ditto that - I use the XH adapter with mine.

[Emaxx_Quebec]

I charge trough a LBA10 and it work very well.

[riverat1540]

lba10 as well, works great with the mrc 989 as when charge is complete it holds constant voltage to cells for an hour , sweet feature to get the cells closely balanced without draining them any

[Unsullied_Spy]

I use an LBA10 with a harness off a newer charger (integrated balancer and you just plug a little adapter into it) and I swap out the adapters for different lipos. My Zippy used the Hyperion, Maxamps, etc. adapter and I had to buy a new one to fit my E-Flite lipo. Very good balancer and the swapable adapters work very well, cleanly, and efficiently.

[C-5Quad]

Thanks for all the replys it was a big help