supermaxx EXT pro users?

[ClodMaxx]

Originally Posted by Procharged5.0

Visit the UE website for installation & set-up instructions plu they have set-up sheets for you to mark how you set-up the truck for specific races, etc.

yeah, i found the EXT install instructions... but i don't think it mentioned the washers. i'll check again. thanks!

[Procharged5.0]

105mm for the FLM Chassis.

[ClodMaxx]

sweet. thanks!

[Serum]

Mike can get you the shafts you need, if you are looking for them.

I used teflon washers on the upper arms (the ones that came as spare with teh UE shocks fit perfect)

[ClodMaxx]

i'll ask mike about the cvd's, and that 105mm dogbone too.

so you put the teflon washer in between the 2 bearings, right? the idea is the binding is caused by the bearings rubbing together? i just want to make sure i'm understanding correctly. i've got some teflon washers, and i'll try installing them.

thanks!!! :)

[Serum]

Lol, no i meant on the hingepin, between the upperarm and the bulk.

You need a spacer between the two bearings to avoid a ruined bearing..