XTM MMT does it again and resets record....

[jzemaxx]

I figured for 100 bucks I plan to run it and if it blows it blows. I plan to gear back down and just go up in voltage...hehe. But the controller lost power and the truck slowed down considerably. Fastest on 10S after it smoked was 72mph....pffssstt....that's weak sauce. I am going to reprogram the controller and see if that does anything.

[lutach]

Originally Posted by jzemaxx

Well did some more testing and it looks like my Turnigy HV might be smoked. Got the white smoke of death but the controller still works, but power dropped big time. Also one of my phaltlines blew completely apart.

I'm selling one of my Jeti Spin200 if you're interested (All you need is the program box). I've seen 4760 watts with my 1521/1Y on 10S and I ran the truck for 9 minutes. I had to change the diff internal gears right after the run. Were your Phatlines taped? I blew mine as I could only find them pre mounted at the time, but when they blew my truck was taking flight .

[jzemaxx]

This set was NOT taped but the other is. I ordered another controller a few mins ago...hehe. For 100 bucks they are hard to beat.

[rabosi]

80 MPH!!! Congrats JZ. It's seems that a GPS might be equal to or more accurate for speed measurements (based on a quick serach on the net). Less than 1 mph accuracy. The bushnell radar gun was listed as +/- 1 mph.

[jzemaxx]

The GPS is always withing .05-1mph of what the radar would show. So both are accurate indeed....problem is the radar puts you in harms way.