BL Tc3

Final chassis design, waiting on the final check on measurements from the place Im getting my poly-quest lipolys from, and then the chassis will be cut.

Pic:

[rchippie]

Originally posted by CrazyPhantom
I got the chassis from Andrew from Cold Fusion Racing today. Here is one of the picture I got, I took more but they came out blurry and then the batteries dies so this is all I got right now.

Pic:


Let me know what you think.
-Joe

Crazy that chassis looks great. Are you going to have andrew make a top plate, to help with chassis flex ?.

I do not beleive that there will be alot of chassis flex, but I do plan on getting a carbon fiber topdeck machined just for looks if anything.

[nbcaznmaster]

nice look, u got liek batt holders or stuff like tha tmade up yet?

The batteries will sit in those pockets on both sides of the chassis, no need for battery cups.

[Batfish]

I just noticed foams on one side of the car and rubber on the other...educate me; if that's on purpose, what's the purpose?
If you just stuck them on there to see how it would look, I understand that as I just realized that all the pics I took with different bodies on my stock E-Maxx had the tires on backwards :)

I put them on there to make the picture looks a little better from the side I shot it from, and also I wanted to see if the 30mm foams would fit in the front and the back. But good catch:cool:

Originally posted by CrazyPhantom
The batteries will sit in those pockets on both sides of the chassis, no need for battery cups.

will you strap them in with velcro or something? :)

I just ordered the Feigao 380C 13T from StarLuck R/C and I am going to be ordering the controller and the 2 Lipoly packs in a couple of weeks. But I will be getting a couple of parts machined in the mean time while I wait to order the controller and batts.

And also, it will most likely be velcro'd in

[rchippie]

Originally posted by CrazyPhantom
I do not beleive that there will be alot of chassis flex, but I do plan on getting a carbon fiber topdeck machined just for looks if anything.

The CF top plate will look killer with the aluminum. There is more flex than people think in those little cars, especialy when you come to a sudden stop :L: .

lol, I seriously dont think there will be alot of flex in a mainly 1/4 aluminum chassis:)

[rchippie]

My bad i did'nt know it started out a 1/4 inch, there probably wont be any flew. That said the CF top plate would still look killer :L: .

lol, yeah, I am most likely anodizing the chassis black, and getting red carbon fiber for the top chassis.

[rchippie]

Originally posted by CrazyPhantom
lol, yeah, I am most likely anodizing the chassis black, and getting red carbon fiber for the top chassis.

Or you can anodize the chassis red, & get black or charcol gray CF. Either way it will look killer. I saw some gold CF a couple weeks a go that would look good also.

[nbcaznmaster]

i always like blue, blue is teh color of assocaited! Well, to me it is!