extra long gmaxx

[maximum]

When you post an answer you get a response!!!!!

[maximum]

Its the holidays ,,,,,, you know!!!!!!!!!

[Serum]

Yeah!! it sure are the holidays!!

time for some scientific experiments!!

[mack]

Yeah can't wait rene:C: :C: :C:

[Jasper]

@ Dafni,

I run a warrior 9920 with 7XL on my savage with a Futaba T3PDF and I have no problems with extreme cogging.

[Dafni]

I'll get a 3PM 27mHz. I hope it works.
Thank you Jasper.

[coolhandcountry]

upon further review it is something to do with the truck. I was wondering if it is possible that the magnetic force form the motor and esc mounted to close could cause such problems.

[Gustav]

Damn you tried another radio?

I've no idea if the magnet could do that but worth a try i guess.It's some magnet alright and it is very close.Doesn't do it to the schulze though(?)and that's right up to the motor.You could try some shielding in between maybe or zip tie the esc to the shock tower to test.

Good luck.:W:

[coolhandcountry]

Well I started a new thread. I hope this may help.
http://www.rc-monster.com/forum/show...&threadid=2047

[coolhandcountry]

Well it has been a while since posted here. I went back to a trans on it. I put the gmaxx single speed on flm half case. I modded the 4mm traxxas motor mount to accept the 2250 lehner. It seems to have fixed my cogging problem. It is not fast enough now.

Well the slipper does not seem to want to take the power. It keeps shearing the pins off on the pressure plates. I may have a fix for this later. I have tested it up to 26 cells so far. It is fair on speed with 26 cells. I may try to get a video later on.

[maxxdude1234]

That motor is huge! Looks like you've can a can of coke sticking out your tranny.

[Sneeck]

You need to fix that bumper m8;) In fact both bumper's:p

Can't wait for a vid. Should houl some serious @$$.

[coolhandcountry]

Which one? I busted the front one and the back is bent. It tried to straighten it and it broke on me. I not sure what bumpers are going on it. I get it straight.

[ttrmike]

Coolhand those are maxx size mulchers right? How do they fit the commando's?

[coolhandcountry]

They fit really well. http://www.rcpics.net/view_single.ph...cb7448b750b2a4 Here is a pic on a cheyenne rim before i decided to go with the bead lock. Here is a thread on them to. http://www.rc-monster.com/forum/showthread.php?t=1703