OKHobby INFINITE 160A-8th-SL ESC - Page 2 - RC-Monster Forums

tashpop · 10.25.2010, 06:07 AM

how long did it take your shipping? i'm still waiting on mine thought i would have had it by now?

brian015 · 10.25.2010, 07:03 AM

Shipping took a while (2-3 weeks).

tashpop · 10.26.2010, 06:02 AM

okay, i'm working on my third week but not over yet.

fastbaja5b · 10.26.2010, 07:26 AM

You'll be waiting a while, okhobby have some of the slowest processing times I have ever experienced.

tashpop · 10.29.2010, 09:04 PM

i got mine today finially. no review yet, but i did put a deans on and powered it up. didn't try programing the radio, but as is it just tried to studder a little then stopped. i hope it works with my motor (6 pole). if not i have a 2 pole i can sub for a while.

florianz · 10.30.2010, 02:12 AM

for 6 pole motors you have to set the timing a little higher, like 8 deg.

tashpop · 10.30.2010, 09:24 AM

thanks for advise!

tashpop · 10.31.2010, 11:33 AM

ok, i setup the radio and left the settings as default. i had my mgm22418 in the truck and after only swapping esc i noticed i get slower speed and less punch. its not getting as much from the batts and the mgm did. there was no cogging at all, and it looks like this would be very good to bash with. i put it in a losi aftershock for my daughter to bash with me. after running for a few min. full speed on the road and some ditch jumps and through some semi tall grass the esc was only 89*f it was maybe 70*f outside at that time. i have high hopes for this thing working out beautifully for what i need.

i've very dissapointed about the need for a usb cable to update for 5s use. i missed that detail ordering now i have to wait.

tashpop · 11.01.2010, 12:41 PM

so i downloaded the info for programming the esc, but there are no instructions on how to do it by remote. is there a way or do i have to buy the program box?

brian015 · 11.01.2010, 01:55 PM

I bought the program box and have only used it to program the esc.

brian015 · 03.06.2011, 03:18 PM

I've been running this esc this winter in my snow-basher truggy (now mud-basher since the snow melted). I waterproofed it with liquid-tape and it has performed well.

Quote:

Originally Posted by brian015

After some more driving, I've noticed if I go off throttle and back on, there is a noticeable lag in the power going back to the motor. I don't know if setting timing or acceleration to "high" will help this, but I'll give it a try next time.

Since I recalibrated my tx, the esc has been performing better than it was according to my above quote. Maybe I didn't calibrated it correctly to begin with, but it responds better now to the throttle.