Cen Matrix TR Arena FRE - Brushless

[jhautz]

No you shouldt toast it like with the old software.

Compared to the old software version the new MM software runs a Neu motor very well. But from what I was experiencing today, it still doesnt run a Neu motor as well as a 2pole motor IMO.

I'm sure that many people woulnt have a problem with what I experienced, but it was not as good as with the 2 pole motors.

I was running it with the latest softare version. I doubt there have been many who have run very similar kv motors one 2 pole and one 4 pole in the same buggy back to back like I did today. I proved it to myself.

At least with the new software I dont get stuck and not be able to start without a push using the Neu motors like with the old software, or cog so bad it waould actually jump backward, but I did experience some momentary glitches that were strong enough to lock up all 4 wheels for a split second. Annoying, but not disaterous. The new software MM and Neu combination is acceptable IMO, but far from perfect yet.