Quote:
Originally Posted by rootar
you have to shave the fins down to fit inside the plastic housing its a tight fit but it works, and easier and better solution would be a FLM tranny case  one of these days ill get one for my slash. i switched to mod1 gearing and can run 40/12 through 40/17 i usually run a 40/14 which is silly silly fast.
http://www.rc-monster.com/forum/atta...8&d=1214712244 |
Oooooo...that's what I was afraid of. I don't know if I'm willing to grind down my heatsink clamp or not. The FLM tranny is starting to look really good now.
I ran my Slash with 40/12 and a 2s lipo for a little up and down my street, but I'll have to wait to try it on 3s and check the temps.
Here's a pic of mod1 gears with the stock 48p spur on top and a mod0.8 (32p) spur for a Jato to the left. Revos use mod1 gears as well as all 1/8 scale buggies.
Threaded Mode
