Lipo discharge q

[fastbaja5b]

Originally Posted by suicideneil

Define "full charge amp burst"- you didnt list the current draw so the *true* C rating can not be determined...

Wouldnt mind seeing some eagle tree graphes of Zippies though, there must be some around somewhere.

Not sure what you're wanting, I charged the 5000mah pack at 1C on my balance charger, then hooked it up to the logger and another identical pack (no logger) on the otherside of the Savage Flux

Powered it up took it for a bash

Downloaded graph as above.

Was hoping some of you lipo gurus would have answers!

I am thinking maybe we need to set the LVC at 3.5v a cell to avoid these below 6v drops near the end of the cycle but before a 3.2v / cell cut off kicks in. Because as I said before, LVC did not kick in.