E Revo Center Diff questions and Opinions

[sjcrss]

SC, thats correct, use the 8X12 on the diff cup side, and into the tranny case, and use the 6x12 on the gear side and use a few shimms to take up any play between the gear and the bearing, and you should be all set. This was originally set up to be a easy design for anyone to be able to make a 1/8 Cd for the erevo tranny. What is everyone's input on this..... Did I manage to make it simple enough, with the exception of drilling & tapping the ring gear, and the 2 holes for the output shafts? Let me know....