Quote:
Originally Posted by crusey_aus
Does the ESC register the throttle and brake endpoints as it normally would during the calibration ?
The flashing yellow light does not indicate a problem
It indicates you have 0 timing configured
Was added by Castle as a ROAR requirement to show the car is not running any added timing
Cheers
|
THe timing has never been altered. THe trucks have ran under this configuration before the update . After doing some further extensive reading after posting this thread I think ill try another traxxas 2.4 tx and if that don't work ill roll the rx software to 1.21 if I have that version number.
Threaded Mode
