1:10 or 1:12 scale project wanted...

[BrianG]

If you use the stock Mod1 Revo spurs (36T, 38T, and 40T), use the regular pinions in Mike's store. Mike already has a Revo motor mount that goes where the stock Nitro motor goes. You can still design your own, but why re-invent the wheel? :)

BTW: The stock Nitro mount will add a lot of strength to keep the mount from flexing. Even with the optional engine bay brace, there is still some slight flex if you don't use the casted Nitro mount assembly.