RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
04.22.2007, 01:46 PM

Well, also remember you are comparing a 380 motor vs a 540 motor (though it has a 480 sized rotor). Either way, its still a larger motor. And even if the KV ratings were the same, the Mamba Max Motor would have more torque since its a 540 and could be geared higher because of it.

However, the Mamba Max motor also has more KV as well, so the Mamba Max will definitely be faster than the Feigao motor.


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Old
  (#2)
riverat1540
RC-Monster Aluminum
 
riverat1540's Avatar
 
Offline
Posts: 503
Join Date: Mar 2007
Location: Algonquin, IL
04.22.2007, 01:50 PM

i couldnt agree more i feel i made a good decision going with the 5700 for 3s and putting the fiegeo away cause i got the need for speed i did a lot of reasearch before ordering the motor but am sure it will do me better than my fiegeo
  Send a message via Yahoo to riverat1540 Send a message via AIM to riverat1540  
Reply With Quote
Old
  (#3)
skellyo
RC-Monster Brushless
 
skellyo's Avatar
 
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
04.22.2007, 04:09 PM

Quote:
Originally Posted by BP-Revo
Well, also remember you are comparing a 380 motor vs a 540 motor (though it has a 480 sized rotor). Either way, its still a larger motor. And even if the KV ratings were the same, the Mamba Max Motor would have more torque since its a 540 and could be geared higher because of it.

However, the Mamba Max motor also has more KV as well, so the Mamba Max will definitely be faster than the Feigao motor.
I disagree on the gearing issue. I think you can actually gear a 380C 6L more agressively then the MM 5700 with better results. The longer rotor, albeit maybe a tiny bit smaller diameter more than makes up for the torque...even moreso given the lower kv of the 6L.

However, for just doing speed runs, I don't think I'd buy either. I'd drop the $ for a Lehner.

FWIW, the 6L is no slouch of a motor...I'm running it real close to 50MPH in my T3 (gps verified at 47.7mph) with only using a 2S lipo. The problem I have is keeping the rolling wheelies to a minimum with all that torque.
www.skellyo.com/T3_4.WMV
   
Reply With Quote
Old
  (#4)
riverat1540
RC-Monster Aluminum
 
riverat1540's Avatar
 
Offline
Posts: 503
Join Date: Mar 2007
Location: Algonquin, IL
04.22.2007, 06:15 PM

i have the fiegeo now and am happy with the speeds im getting but hear of more speed with the mamba 5700 and i also hear the mamba is more efficient so i bought one and will compare motors and see which one i like more and just keep the one i dont like as much as a spare.
  Send a message via Yahoo to riverat1540 Send a message via AIM to riverat1540  
Reply With Quote
Old
  (#5)
skellyo
RC-Monster Brushless
 
skellyo's Avatar
 
Offline
Posts: 2,466
Join Date: Jan 2006
Location: Florida
04.22.2007, 07:26 PM

Quote:
Originally Posted by riverat1540
i have the fiegeo now and am happy with the speeds im getting but hear of more speed with the mamba 5700 and i also hear the mamba is more efficient so i bought one and will compare motors and see which one i like more and just keep the one i dont like as much as a spare.
You should easily get more speed out of the MM, just due to being able to go to 3S. The MM are decent motors, but I think too many discount the Feigao as inferior when they do perform extremely well.
   
Reply With Quote
Old
  (#6)
riverat1540
RC-Monster Aluminum
 
riverat1540's Avatar
 
Offline
Posts: 503
Join Date: Mar 2007
Location: Algonquin, IL
04.22.2007, 07:37 PM

yea and the torque is amazing even on 6 cells with the fiegeo. did u see my video?

http://www.youtube.com/watch?v=aFM9AnUILI4 the feigeo ripped 3 diff gears apart in this truck before i got the slipper set right
  Send a message via Yahoo to riverat1540 Send a message via AIM to riverat1540  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com