HOW TO: Quark Mod / LSP Conversion *PIC OVERLOAD WARNING*

Zero, I said "one small change", because I soldered the fan plug before the quark plug, but didn't feel like changing the diagram in MSPaint :)

for everyone:
I don't have any better pictures of the component before it smoked, but here's the one I already posted, at original resolution. I don't see anything on the component at all..


and here's some pictures after it fried:
http://a4dtm.com/lsp/3fry.jpg
http://a4dtm.com/lsp/1fry.jpg
http://a4dtm.com/lsp/2fry.jpg

I didn't just assume what part fried.. I took the side of the case off, and looked, and that's when I posted what I think has fried.

I might have to bend the side of the case down a little more, because that is very little room to get a soldering iron in there, and try and hold the component in place.. and add solder,, ect.

We order from digi-key quite frequently at my work, and as for soldering, for the last week, I've been soldering about 4 hours a day.. We've got hakko soldering stations, and multiple tips, including tweezers, which might come in handy. I guess I'll have to contact S&T and see if they'll tell me what that component is, and I'll go ahead and order it, and try and get it replaced..
Do you guys have any other thoughts?