10s System

[Finnster]

I'm working on a hi-volt setup, but going w/ 10S A123/8S lipo and planning to use the MGM 9032. Even with the 9032, on 10S lipo you are talking over 3000W, and this is high eff wattage, so many more usable watts over an in-eff XL setup. Power potential is huge.

A 1515 3D or 2Y (1360 kv or 1100 kv) would be a good choice. I'm looking at a 2Y as I'm aiming more for high eff than over the top power, and the possiblity to throw on a couple extra cells for nuttiness if needed.

A 3D on 10S would be absolutely insane IMO if that is what you are aiming for. g/l