rc18t ready to go big. lol!

[lincpimp]

You can use the mamba 25 esc, and a bigger motor like the 280 series feigaos. But if you have the mamba system already the rc18t is the best bet.

https://www.unitedhobbies.com/UNITED...idProduct=2063

[t-maxxracer32]

mini feigao motors! haha! youd have to use like 3s on that though wouldnt you?

Originally Posted by lincpimp

You can use the mamba 25 esc, and a bigger motor like the 280 series feigaos. But if you have the mamba system already the rc18t is the best bet.

https://www.unitedhobbies.com/UNITED...idProduct=2063

[lincpimp]

Yes, 3s works well on the "mini feigao". Feigao actually make motors similar sized to the mamba motors and they are good too. I had a 130 l can in a rc18t and ran it on 3s lipo and it hauled as.....

It also ran cooler than my 5400 mamba on 2s. Mamba motors are just too small IMO. My mini quake has way more power than it can use, worse than a 5s setup in an emaxx or 1/8 buggy. It just kind of takes off at around 45mph, and then crashes

[t-maxxracer32]

Originally Posted by lincpimp

Yes, 3s works well on the "mini feigao". Feigao actually make motors similar sized to the mamba motors and they are good too. I had a 130 l can in a rc18t and ran it on 3s lipo and it hauled as.....

It also ran cooler than my 5400 mamba on 2s. Mamba motors are just too small IMO. My mini quake has way more power than it can use, worse than a 5s setup in an emaxx or 1/8 buggy. It just kind of takes off at around 45mph, and then crashes

lol gotta love the high speed crashes!and ya the mm motor in my rc18 gets EXTREMELY hot...

Are the feigaos 280 avable with a 2mm shaft?

Originally Posted by lincpimp

You can use the mamba 25 esc, and a bigger motor like the 280 series feigaos. But if you have the mamba system already the rc18t is the best bet.

https://www.unitedhobbies.com/UNITED...idProduct=2063