 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
09.25.2007, 03:23 PM
check these out...I used one for a while, before I lost it at the last dragrace.
 Towerhobbies sells them. LINK I solder one up yesterday using 13AWG Dean wires 
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
hold my beer... watch this...
Offline
Posts: 969
Join Date: Feb 2007
Location: berkley, michigan
|
09.25.2007, 03:43 PM
nice, snellemin! i'll most likely either make or buy one like in your second shot, since i have my MM batt leads cut pretty short. something like this:
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
Knowing You're Hooked on RC: Priceless...
Offline
Posts: 271
Join Date: Feb 2006
Location: Blue Springs (KC) MO
|
09.25.2007, 05:18 PM
I got a Dewalt 36v pack and tore it down into two 3s and two 2s packs. Fantastic cells! I didn't even have to solder anything except the wires together. Just had to cut a couple battery bars, which are quite thick compared to the ones used in cheap NiMh packs (radioshack, powerizer, tenergy, etc). They haven't given me any heat problems on my Mamba 5700 Rusty:yipi. Considering I got them for $7.50 per cell makes them a heck of a deal!
The only problems they do give me is lack of tire glue  ...Brijar!!! Slash 2x4 LCG Two Slash 4x4s Rustler |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
