Steel Dog bones for stock length E-Maxx?

[mkrusedc]

These are my current upgrades:

Upgrades:
Neu 1515/1y/f
MGM Compro 160/16 controller
2 TrakPower 2S1P 4900 mAh LiPo battery packs
PowerStroke shocks
12 Associated slipper balls
Traxxas wheelie bar
RPM suspension arms
RPM axle carriers
Traxxas 3.3 turnbuckles
Traxxas 3.3 drive shafts
Revo wheels
RC-Monster steel dog bone center shafts
Traxxas 3.3 gray bulkheads
Power Pole connectors
Futaba S3305 MG steering servo
Gorilla Max single speed transmission
RPM shock towers and body posts
RC-Monster steel idler

Still to come:
Strobe slipper
FLM aluminum diff cups with modified gear and 3 mm screws
Pro-Line velocity dish wheels w/ MaxxMasher tires

I've got pretty close to what you've got in upgrades.

I'm just afraid that with running so much power in the E-maxx, I'll be constantly breaking driveline parts.

How do you find the speeds using 4s?

[mkrusedc]

Originally Posted by BLRusty

I've got pretty close to what you've got in upgrades.

I'm just afraid that with running so much power in the E-maxx, I'll be constantly breaking driveline parts.

How do you find the speeds using 4s?

Constant wheelies if I want them. Tires still balooning 15 minutes into the run. 6s will be insanely fast. You are going to need mad driving skills and throttle control.

My current gearing with 6s:

Differential Ratio: 2.8461538461538462
Transmission Ratio: 1.7222222222222223
Other Ratio: 1
Spur Tooth Count: 52
Pinion Tooth Count: 17
Total Voltage: 22.2
Motor KV: 2200
Tire Diameter (inches): 6
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0.006
Spur/Pinion Ratio: 3.06 : 1
Total Ratio: 14.99346 : 1
Tire Circumference (inches): 18.85 inches (478.78mm)
Total Motor Speed: 48840 RPM
Vehicle Speed: 58.14 MPH (93.4km/h)
Effective Speed Rate: 2.62mph/V (4.21kmh/V)
Effective KV Value: 2200

= and different gearing.