jammin crt.5 motor suggestions

[BrianG]

Your best bet would be to run 3s and an L size motor with a kv of around 3000. The MM motors are too small IMO. An S motor would be better than a MM motor, but an L motor would be better. Unfortunately, Mike only has the 9L and that is out of stock. You could try to contact him for an equivalent motor choice. But, you defintely want an L size around 3000 kv on 3s.

thanks,

so ill get a 3s pack, 5k ?
a mm esc.

would a 9L be a good choice on 3s?