My Neu Maxx is almost done

[GorillaMaxx360]

what gearing are you running and how is the mesh. WHat size pinion with the 51t gear do you atleast need to use for the mesh to work.

[suicideneil]

Originally Posted by GorillaMaxx360

what gearing are you running and how is the mesh. WHat size pinion with the 51t gear do you atleast need to use for the mesh to work.

52t mod1 Associated gear and a 17t pinion.

[mkrusedc]

Originally Posted by suicideneil

52t mod1 Associated gear and a 17t pinion.

Thanks for posting that Neil.

Sorry GorillaMax360, I have not checked this thread in a while. I was worried about the gears meshing because of the Neu hitting the tranny so measured the distance between the tranny input shaft and the motor shaft. I then used Brian's gear calculator to come up with the gears. I had to use the Associated gear because I still have the stock slipper. I have a stobe on the way so i may try some different gear ratios in the future.

Here it is: http://scriptasylum.com/rc_speed/_gear_calc.html