E-maxx CVD's

[ClodMaxx]

sorry... should've mentioned that the link i provided was to a buy/sell/trade part of the UE forum. if you're not already a member there, you'll need a membership to view the b/s/t forums. anyhow, the link i provided was to a guy selling a set of UE 6mm cvds.

MIPs aren't bad. no comparison to UE, but not bad. i don't know much about the traxxas cvds, but i'd look at them if UE isn't an option.

[magudaman]

I use the MIPs on my emaxx and they are very very strong. I recently shreaded by diff in the rear and I took apart the CVD think I would see wear, I mean com'on I ruined a diff. Well I looked at the CVD parts and I couldn't even see wear through their black finish. I guess the only down side would be they are steel so they are heavy but indestructible. Good luck.

[ClodMaxx]

i had MIPs on the front/rear of my maxx for about a year and i noticed the pin wore the hole larger in the axle portion. a noticeable amount. i'm not hard on my trucks by any means, but it was under brushless (well, novak 6.5) power the whole time. still, i replaced them with UE before any problems could arise.

MIP centers are another story entirely. do NOT get those, under any circumstances. they should be banned. maybe i'll write my congressman about them.