BK programming cable?

[sleebus.jones]

Just wanted to post for all to see that sjcrss is a class act. Shipped it quick and packed well, and included the english translation. I got it the other day, and got it running on my XP box with only minor problems.

1st, if you are bypassing the BEC on the ESC, it won't work. You'll need to either plug the jumper back in, or stick the red wire back into the RX connector. This is becausebut the cable needs to power the ESC to work. My cable has a RX pack attached to it for four 1.5v AA batteries.

2nd, You'll need to get the most current software from BK. The one that was at lehner was old. It did connect to the ESC, but I couldn't change any settings. The one I got from BK (ftp://download.bk-electronics.com/WarriorProg.exe) allowed me to change settings, although it really only allows me to change the time to 100% throttle (to protect your tranny) the timing and the starting assistance. Since I'm going to be running 4S on it, some of those settings, minor as they are, will most likely come in handy.

BTW, this is running on a a Windows XP box with no problems. I'm using a real hardware parallel port (no USB emulator here) and it works perfectly fine.

Hope this helps anyone who might have had some problems getting theirs to work, and thanks again, sjcrss!

Sleeb

[sjcrss]

Sleebus, thanks for the kind words, and I'm glad you got it all to work, as for the programming i tried getting it from BK, that is why I sent you the lehner link, but since you got it all working...that is great, and I'm glad you found the english translation helpful. Any other questions just ask....