BL system for a crt.5 on 2s

Originally Posted by GO-RIDE.com

I've had the same cool running results with my Novak GTB and 6.5 (5900kv) combo (46/12-13 gearing). I'm running truck tires (2.2 Panther Switch Clays) and driving really hard on an indoor track. Lots of throttle and up to 20 min. runs (4800 2s lipo). I don't get any heat. The motor is warm (no heat sink), but definitely not hot. What I do notice is a good sized area of the chassis, around the motor and motor mount, gets a bit warm too. It seems the aluminum mount and chassis work as a large heat sink.

Just wondering, where do you race at?

Sounds like she runs good

[ssspconcepts]

Originally Posted by BlackedOutREVO

Your the only one who couldnt get the wing to work....

BP has a jao crowd pleaser, Cemetery gates has a normal jato body, metal man has a nitro rusty body from proline I think, RCM Mike uses a RC10GT body

I think the body just needs some creative trimming like all the other ones.... The stock body would be just retarded IMO lol, WAY to short

You are right...I could hack up the body and manage to install the wing, but all my other cars have wings and this one looks plenty tough without one. For now I will not pursue installing the wing...I am happy with what I have.

Originally Posted by ssspconcepts

You are right...I could hack up the body and manage to install the wing, but all my other cars have wings and this one looks plenty tough without one. For now I will not pursue installing the wing...I am happy with what I have.

Yeah, I love your crt.5, its very clean

Where did you get the black high downforce wing though? Whats the part number?

[ssspconcepts]

Originally Posted by BlackedOutREVO

Yeah, I love your crt.5, its very clean

Where did you get the black high downforce wing though? Whats the part number?

Not sure about the part number...I ordered it from ebay...NitroHouse.

Originally Posted by ssspconcepts

Not sure about the part number...I ordered it from ebay...NitroHouse.

Got a link?

[HBRC]

Couple of pics.

Next to a T4 for size comparison.

I used some aluminum angle and delrin blocks to make the battery tray. It fits a maxamps 2s6000. I didn't like the idea of the battery hanging off the side of the chassis, so it's on it's side. I also made room for the RX and ESC on the diff top plate.

I just need to mill out some holes to lighten everything up.

I tried a few bodies at the LHS. Found the Proline for the Losi XXXNT fits pretty good. Had to lose the wing, but that's ok because it looked a little small and silly with the 10th scale body.

Originally Posted by HBRC

Couple of pics.

Next to a T4 for size comparison.

I used some aluminum angle and delrin blocks to make the battery tray. It fits a maxamps 2s6000. I didn't like the idea of the battery hanging off the side of the chassis, so it's on it's side. I also made room for the RX and ESC on the diff top plate.

I just need to mill out some holes to lighten everything up.

I tried a few bodies at the LHS. Found the Proline for the Losi XXXNT fits pretty good. Had to lose the wing, but that's ok because it looked a little small and silly with the 10th scale body.

Nice! Finally a comparison pic Thanks!

Your .5 looks grate! Nice work!

is that the 540 7s?