Going BL on my Savage

[suicideneil]

Did you order pinions too- remember the XL motors have a 5mm shaft, so you will need either MOD1 pinions with a 5mm bore & MOD1 spurs, or you could use 32pitch spurs and 32pitch pinions with a 5mm bore; mike has everything.

You are forgiven Duster- Im sure I read somewhere a while back someone did exactly as you said, but Im damned if I can find the thread. It would be a good idea really to use something like a fine foam mesh, rather than something like hotmelt glue etc. That way you still get airflow through the esc, which aids cooling. I would also highly recommend taking a look at GriffinRU's mod, it is rather brilliant in my opinion.