Direct Drive to Diff E Revo Build

[sikeston34m]

I wonder what size wire he is using. He does it all with only one strand!

[sikeston34m]

http://babelfish.altavista.com/ is a good translator.

Just copy and post the PowerCroco url to it and you can navigate the website in English.

Pretty cool

[sikeston34m]

I thought something looked funny about the german guys wind in thinking it was a wye termination.

After reading some more, it's a Delta winding. He just made the connection across the stator by soldering.

[sikeston34m]

I'm waiting on my 200C 22Ga. Winding Wire to come in, looks like it's going to be early part of next week. *sigh* The AXI 4130 is just sitting here waiting.

In the meantime, I have spotted a couple of motors to practice winding on. They are outrunner motors that I've used with the E maxx.

One is the 650kv that I do the E maxx outrunner conversion with. The other is a discontinued Lightning 600 Helicopter motor that I was running an E maxx with.

I just unwound a Lightning 600 stator. It was wound Delta DLRK style with 20 strands at 5 turns per pole.

The stator on this motor is 35mm in diameter and 30mm long. Each pole was really full wound this way. It's a little puzzling to me because this motor was rated at 715kv. Being a 5 turn motor, It seems like the kv rating would have been much higher than this.

@JohnRob - Did you get your wire ordered?