Quote:
Originally Posted by chumanji
What do you guys think about the Tekno conversion kit. Opinions pls.
Are there any big difference between the 8xl and 9xl motor?
If I use the Tekno kit, do I need to change any gear ratio or use the stock clutch bell.
Do I need to lock the 2nd speed? What other mods do I need to do?
|
You can stick with the same gearing you used on the Revo with the same trans. That is what it was designed for. However with the extra power/torque of BL you may want to gear it a little taller. Yes you can and will be using the stock clutchbell. No you do not need to lock 2nd if you want to have a 2 speed trans. I have the Tekno kit and think it is great. I am also going to be using the stock Revo 2 speed trans. I do however have the FOC (forward only control) installed in it. I am also going to be running 16/36 gearing to start and then try a 18/36.
Threaded Mode
