Revo 3.3 Tranny with all Metal Gears problem

Also would you think that the hardness is only so deep if its heat treated etc or am i way off ...

[Finnster]

This guy (boghos is name here) has a locking hub for the second gear that would work, if he still sells them.

I can't find a pic, but its an alu piece that is solid and replaces the clutch. He used to sell them seperately until people starteddoing the (free) mod above. This may be the easiest/ most reliable soln.

[BrianG]

Not sure how deep the hardening goes. The gears could be made from hardened metal, or just the surface could be hardened. That's probably something you'd have to contact RR for to get a definitive answer.

In the meantime, you could simply use the stock second gear and use the rest of the metal gears until you come up with a solution for the steel gear issue. Yeah, it's not as good, but at least you'd be up and running until then.

Originally Posted by Finnster

... He used to sell them seperately until people started doing the (free) mod above...

Sorry, that's probably my fault.

I talked to him and I think I am going to send him the gear to make sure it will work with his clutch locking setup, I think its going to be around 25 bucks, figured more people on here would want these if they go all rr metal gears in their revo tranny, I will keep everyone advised...thanks everyone