My emaxx build

[suicideneil]

I dont have the part numbers, but all the bits you need can be had cheapily & easily from ebay:-
Knuckles with bearings x4
Drive shafts x4
Tmaxx 3.3 turnbuckles (I bought old emaxx ones the first time around, woops)

And thats all you need, shouldnt cost more than about $40 ish at the most, and the newer drive shafts are solid; I run a locked slipper on my 13lb Gmaxx, and so far so good. The MMM esc should be well worth the wait I reckon, especially if it will be $300 with motor, cant beat that for value I reckon.