Trinity NOW BL 1/18 Truggy????

The 6000 will fit with the adapter I made but it's too heavy. I think it's already to heavy with the 4000, using a 6000 will make it a brick with wheels.

The Ebay motor I ordered is too much also. It's rated at 8750kv and coggs like crazy, and a 10 minute run made the can run really hot. I'm going back to the stock motor anyone here need a 8750kv 280 motor?

Originally Posted by bluonyx

The Ebay motor I ordered is too much also. It's rated at 8750kv and coggs like crazy, and a 10 minute run made the can run really hot. I'm going back to the stock motor anyone here need a 8750kv 280 motor?

That motor seems to be a 180 (20mm diameter), the 280s are 24mm.

[themadbaja]

I ran mine with 8000kv motor is was stupid fast

here is the video

http://www.themadbaja.com/forum/view...php?f=53&t=940

[Jeremy1976]

I just ordered the new Maxamps 25c 3s 2200 mah lipo for mine today with Deans plugs.

Originally Posted by themadbaja

I ran mine with 8000kv motor is was stupid fast

here is the video

http://www.themadbaja.com/forum/view...php?f=53&t=940

That's pretty much how mine looked with the 8750kv motor, once I tried it in the dirt it was pathetic. I couldn't go anywhere because it was so fast I had no traction. So I went back to the stock BL motor, I ordered a 280 heatsink w/ fan from Thetoyz.com for mine. Just waiting for it to get here now.

[themadbaja]

can you link me to the pack ? when i go on maxamps and look at the 3c 2100 pack its $56 Dealer cost to me..

thanks