RC-Monster Forums  

Go Back   RC-Monster Forums > RC-Monster Area > General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
Serum
RC-Monster Admin
 
Serum's Avatar
 
Offline
Posts: 10,480
Join Date: Feb 2005
01.04.2008, 01:55 PM

You could also simple hook up the red to the black wire. they tend to heat up pretty easy that way.
   
Reply With Quote
Old
  (#2)
BlackedOutREVO
Guest
 
Posts: n/a
01.04.2008, 03:58 PM

Quote:
Originally Posted by Serum View Post
You could also simple hook up the red to the black wire. they tend to heat up pretty easy that way.
   
Reply With Quote
Old
  (#3)
starscream
RC-Monster TQ
 
starscream's Avatar
 
Offline
Posts: 703
Join Date: Mar 2005
01.04.2008, 09:16 PM

Quote:
Originally Posted by Serum View Post
You could also simple hook up the red to the black wire. they tend to heat up pretty easy that way.
If you're really in a hurry, you could hook the red wire to the black then throw it in the micowave for a min or so. That should def get the temps up in a hurry

I'd say any temp below 50F is going to noticeably degrade the Lipo performance. I keep my Lipo's in my pockets when at the track when its that cold and then use a heat gun for a min to warm em up a bit before the race.


Ha Ha
The Flashlight Strikes Again...
   
Reply With Quote
Old
  (#4)
rchippie
RC-Monster Brushless
 
rchippie's Avatar
 
Offline
Posts: 2,824
Join Date: Apr 2005
Location: largo fl
01.04.2008, 09:51 PM

I called flightpower today & got the answer i was looking for. They said they do not recomend use a lipo when the core temp of the lipo is below 40 degress. They also said if it's that cold when your done using it they said put it right back on the charger as long as your pack is not over 100 or 110 degress, to keep the core temp up. They said this will also help lower the over all temp of your lipo in the charging process.


REAL MEN RUN BRUSHLESS

Last edited by rchippie; 01.04.2008 at 10:18 PM.
   
Reply With Quote
Old
  (#5)
cemetery gates
Guest
 
Posts: n/a
01.04.2008, 11:25 PM

Well, I run a mm5700 on 3s in my losi xxx-s. It was about 40*f when I decided to go do some speed runs at the local(not really) huge parking lot. Just starting off my lipo(maxamps 3s 4k) was at 67*f. I radar-ed in at 33mph; then ran slowly tried to warm up the lipo and gradually hit 40mph. After, I decided to chuck the lipo on the windshield defroster in my car. Warmed it up to a nice 95*f then clocked in at a nice 57mph. Warming the lipos really do help.

I was talking to one of my boat racing friends(brushless of course) and he preheats his lipos to about 110*f before starting, supposedly it helps the electricity flow better....

Bye
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com