RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#14)
highflier
Emaxx- FLM wannabe
 
Offline
Posts: 253
Join Date: Oct 2005
Location: PA
01.06.2008, 11:41 PM

Do some math. 12 cell 3300's = 47 watt hours
You use 7 watt hours per minute

You could run 4s A123 14.4 volts To get the run time you want you will need 47 X 2.5 watt hours = 117 watt hours
each 4s1p pack will give you 33 watt hours 4.7 min runtime
4s2p = 66 9.4 min run time
4s3p = 99 14.1 min run time
4s4p = 132 watt hrs. 18.8 min run time



That will be $200.00 worth of cells, 2 dewalt packs converted. Plus you will have 4 spare cells

If it were not for your ESC limits I would really say go 6s3p then your could get a few deep cycles and charge the pack up in less 15 min. so you could play as long as you want!
2 complete sets would give you non-stop play.

Your current pack should weigh about 1.75 lbs
The A123 4s4p pack would weigh 3.00 lbs
However if you say with NMHI 1.75lbs * 2.5 = 4.3 lbs ( in theory)

So that would save you 1 1/3 lb. on your truck and the pack only cost 200.00 what a steal


Your 5000 mah NMHI is 72 watt hours or 10 min of run time

End result. build yourself 2 sets of 4s3p packs, you'll run all day and 14+ min per run. All and all you will spend about 300 for the packs. This will weigh just a tad over what you run now!

Highflier
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com