1515 1y/f & Quark 125b... What to build?

[jnev]

That is correct, you just solder them on. The first one may be a little challenging, but you get the hang of it pretty quickly.

So I think I have everything for my project. So far I have:

1515 1y/f
Quark 125b
Quark Heatsink
2x 40mm Fans
RC Monster rc8 Mount
14 & 15 tooth mod-1 5mm pinions

I am going to purchase the rc8 from my LHS this weekend and order the 4s 6000 Lipo. Is there anything else I am missing? Do I need an external BEC with the Quark?

I also need to pick up the bullet connectors as well for motor and ESC. Will the Traxxas connectors handle 4s or do I need another type of connector for the battery to the ESC?

God knows I can't afford this car, but this stuff is like crack.

[lincpimp]

Running an external bec will help the qaurk stay cooler. The ccbec is great and for 20 bucks it is a great deal. The traxxas connectors should be good for higher voltage, less current will be going through them than the vxl can pull.

Enjoy the crack, just clean yourself up before you go back to work.