RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > T/E Maxx Parts

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#3)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
01.24.2008, 08:34 PM

Yeah, t-maxx is right. Those 6 cell packs have close to the same nominal voltage as a 4s (or dual 2s) pack, but the NiMHs voltage will drop more under load, which reduces the motor speed. Appropriately sized lipos hold their voltage better under load, which translates to faster speeds and better throttle response.

For example, a typical zapped NiMH cell is good for around 30A while maintaining 1.2v per cell. If you draw more than that, the voltage starts to fall because of internal resistance. So, instead of 14.4v, you might be getting only 12v (1v per cell) or less under load. A good lipo can maintain 3.5-3.6v per cell with much higher currents so it feels much stronger and can go faster. After all, motor speed is voltage X motor KV...
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com