mm+ neu-1515 2700kv motor ?

[mkrusedc]

Originally Posted by Happywing

I run the MM/Neu 1.5d/f (2700Kv) in my MBX5T and it works great. My gearing is 11/46. The 1Y is 2200Kv and would require a larger pinion (which may be why mkrusedc gets some cogging).

happywing is correct. I could only go down so far and still get a good mesh with the spur. The lagre Neu hits the E-Maxx tranny and cannot be placed closer for smaller spurs. I think 17/52 gearing was the smallest I could fit.

Mark