LSP Conversion...

[lutach]

Originally Posted by lincpimp

You are such a tease Lutach! If you mean a motor, just make sure you have a 12s capable esc with proportional brakes to offer with it! And make sure it is under 150 bucks for the motor/esc!

If you could do that you would be the man!

Sorry linc. I will say more when it's here though.

[lincpimp]

Originally Posted by lutach

Sorry linc. I will say more when it's here though.

Sweet, I can't wait!

[BL_RV0]

nice setup lutach. is there a different mega you'd recommend? what mAh are the batts and what runtime do you get with them? when you said, "the pinion and spur are outta whack," you weren't kidding. it sounds like me stepping on a bag of potato chips.

[BL_RV0]

hows this lipo look?
http://www3.towerhobbies.com/cgi-bin...?&I=LXRVZ9&P=7

[lutach]

Originally Posted by BL_RV0

nice setup lutach. is there a different mega you'd recommend? what mAh are the batts and what runtime do you get with them? when you said, "the pinion and spur are outta whack," you weren't kidding. it sounds like me stepping on a bag of potato chips.

I only use the ACn22/30/2, beacause I got a good deal on it. I'm planning on getting a ACn22/50/1, but the ACn22/45/1E will also be good. Those lipos are 2200mAh and I got 23 minutes already out of them. That truck is tough, I ran it in a large parking lot at a park and lost signal. It went straight into a curb. The Flight Power is good, but ask Mike if he can get the Polyquest XQ with a 30C discharge or the Flight Power EVO30.

[BL_RV0]

what about this
http://www.hobbycity.com/hobbycity/s...idProduct=6236

[lutach]

That should do it. You might even be able to run 2 of those in parallel.