My HV Outrunner REVO

[sikeston34m]

OMG!

That's the smoothest I've seen!

Very Good! I'm becoming more and more convinced on the Kontronik line.

That's a different startup routine in the software. Works great!

[BL-Power]

Yeah, it's running really smooth, it think also this is because the Kontronik ESCs have a great car software and are choosing the perfect motor timing automatically.

[lutach]

Kontronik makes a really good controller. I hope the new Jive controllers will come out with the car mode.

[BL-Power]

I recieved my Integy diffcases, hardened gears and Maximizer diffcups today:



Yesterday i crashed with 30mph into the tire of a truck and it killed my RPM rear bumper, my wing, my wing mount and my rear body mount....

Now i'm waiting for my spares from liquidrc....

[ghostriderlund]

i have exact same outrunner :)
i stuffed it in a homebuildt car a little bigger that the pede with rwd and the outrunner coupled direct to diff tru a dogbone.. only testet on 5 cells so far, seeing that it can pull your big truck no wonder im only peaking at 17A in my truck :) gues i will put it in something bigger tires on it then :)
nice build

[sikeston34m]

Those are some VERY nice diffs you have there BL!

Any updates?


Do you feel like your setup would work well with even higher gearing?

Your current gear ratio is 4.6:1 total.

I am switching my Direct Drive to Diff Revo from 4.3:1 diff ratio to 3.3:1 diff gear ratio. I'm hoping it will work without cogging.

I've also been thinking about buying a Kontronik ESC like yours.

[BL-Power]

I'm still waiting for my parts from liquidrc and i'm looking for someone who is interested in my CrimeFighters that i can order the Phaltlines. According to Brians calculator my total ratio is 4,9!? I think my setup would also work well with higher gearing. Is your motor cogging only when it is under load in your vehicle or is it also cogging if you let it spin freely?

I can only recommend you buying a Kontronik ESC, you won't be disappointed.