my balancer stops at 85% ?

[Arct1k]

How do you know the packs are only that full - what is the termination voltage?

Just a thought but I'm guessing but you might be looking at the mah put into a dumped pack... The differential is just what was left in the pack.

The hyperion is charging at very close to 1c on the 8000mah pack... I guess the orbitmicro might not have the ampage to do that.

Rgds

[speedy]

but the orbit can charge current can be set at 6ah and the charge power is the same as the 1210i 180w.
My hyperion 1210i shows the estimated capacety of the pack when i cinect the lipopacks to the charger and then it starts counting up to 100% from that number ! and thease pack's shower 34% when pluged in.