Going to take the plunge and convert my XB8EC

VintageMA, thanks for the detailed response. Had a look at the Videos and followed your instructions but still unable to get the solder to stick to the tabs. I think I will need a solder with a higher precentage of Tin and 2% silver for this to work.

Going to purchase the multicore stuff that comes with flux etc etc and we will see if that improves the situation.

[VintageMA]

Not sure exactly what the mix of the solder I use is, but I just use the basic (60/40) solder you can get at Radio Shack. It's nothing special, but I've been using for years since I was soldering circuit boards during EE classes without a problem.

Also - what is the power of you soldering iron? I use an old 35 watt Weller or a Weller pyropen (portable butane powered) and never have a problem with either.

[jhautz]

If you are having trouble making the solder stick. Try coating the surfaces you are soldering with some flux. It really helps the soder stick easier.

http://www.radioshack.com/product/in...entPage=search