Is there a way improve the LVC shutdown - RC-Monster Forums

Resistance (ohms): Enter the LVC internal resistance, 200,000 in this case.
Capacitance (farads): I used 22uF. Other common values for ~25v are 10uF and 47uF, but don\'t provide the right delay IMO, but that\'s up to you.
Battery Voltage: Self-explanatory. Use the nominal battery voltage. For a 4s pack, use 14.8v.
Time Constants to show: Caps are accepted to be charged/discharged in 5 time constants, but if you want to see more detail in the lower time ranges, use a lower number.
Euler\'s number: This is a constant for natural logarithm base. Leave as-is unless you really want to mess with it.

Gee · 02.11.2008, 06:20 PM

Thanks Niel. I got a LVC for a 7.4 of e-bay that had a light and a buzzer. The alarm would go off real early. When I contacted the person he said he the were set up for planes but he could set it up any way I wanted. To not go off until the voltage was below for a longer time or the actual LVC was 6v etc. I think I will try and reach him again and see what he can do for me.

What will an the extra HV cap do? I looked at thread you linked to about installng them but it was like 32 pages long. Do you mind re"cap"ing it for me. Less heat?