Cheap "high voltage" esc Quest

[suicideneil]

So, higher amp and/or voltage handling?

[lutach]

Originally Posted by suicideneil

So, higher amp and/or voltage handling?

Higher AMP for sure. I asked the factory for a few other models and if they send them to me I'll be happy.

[GriffinRU]

I do not know guys, but whoever wrote this firmware was really up for something...

I was unable to sync Jammin's ESC to anything at all, just blinking LED no beeps no nothing, but I do have brakes :)

Opened unit number 2 and it beeps, spins and does whatever it wants but none of what I expecting to see...

Is it possible to set it all? I ditched everything and start playing with Traxxas transmitter (what can be simpler), trying to reverse channel, 30/70, 50/50 splits it just doesn't make sense. I guess I will try next weekend, what a bummer.

[lutach]

Maybe that brain board is for the aircraft controller. I know some of the car controllers found in the forum and the one I have, the brain board is red in color and the aircraft one is green and you can see them in the pictures I posted. Do you have the program box? You can also try and calibrate the controller. Try one of the following:

1. --no need to set up Throttle itinerary ---- startup process

pull throttle into the lowest position -- → ESC power connecting → Detect and get throttle signal one beep tone "beep" → 3 seconds delay → detected throttle lowest position → one beep tone "beep" again → can start throttle Moved.( start flying). this step total beep twice . there had light on ESC when each beep tone .


If not detected throttle signal, "beep, beep and beep ... " continued beep tones are emitted.

If the battery voltage exceeds voltage, "BEEP, BEEP, BEEP ." continued beep tones are emitted. the beep tone

pause for a bit longer,Under such circumstances, ESC refused to start motor.

2.need to set up Throttle itinerary ---- startup process


pull throttle to the highest position -- → ESC power connecting → Detect and get throttle signal one beep tone "beep" → detected maximum throttle position, "beep" tone is emitted (one beep tone) → then pull to the lowest throttle position → 3 seconds of delay → "beep" tone is emitted once, Detected the lowest throttle position → can start lifting the throttle. three beep tone is emitted .

Note : This method set up the throttle itinerary is not saved. throttle itinerary can be set up and saved permanently by our programm card.

[lutach]

Originally Posted by GriffinRU

I do not know guys, but whoever wrote this firmware was really up for something...

I was unable to sync Sammus's ESC to anything at all, just blinking LED no beeps no nothing, but I do have brakes :)

Opened unit number 2 and it beeps, spins and does whatever it wants but none of what I expecting to see...

Is it possible to set it all? I ditched everything and start playing with Traxxas transmitter (what can be simpler), trying to reverse channel, 30/70, 50/50 splits it just doesn't make sense. I guess I will try next weekend, what a bummer.

BTW your powerboard looks awesome. I can't wait to see you get everything sorted out. Have you thought about changing the FET drive for a more powerfull one. Maybe the MOSFET you are using might not be able to switch fast enough. I hope I'm right in one of those .

[GriffinRU]

Originally Posted by lutach

BTW your powerboard looks awesome. I can't wait to see you get everything sorted out. Have you thought about changing the FET drive for a more powerfull one. Maybe the MOSFET you are using might not be able to switch fast enough. I hope I'm right in one of those .

Thank You,
Finally, with your help, I have something under control. Still need to be armed every time you power it Up but I can live with that for now...
Now back to Frankenstein, updates will follow...

[lutach]

Originally Posted by GriffinRU

Thank You,
Finally, with your help, I have something under control. Still need to be armed every time you power it Up but I can live with that for now...
Now back to Frankenstein, updates will follow...

I feel honored. I have to thank you for all the inputs you have given all of us here. So basically you have your awesome controller now? I want one. I'm jealous.

[GriffinRU]

I am not happy with that ESC in general...
Is it operational? Yes and kind of no, I do not like how it works.

Luciano what you would like to do with that "cheap" (not really) ESC?

No comparison to MM neither in price, quality or features. I even put BK on top of it not even mentioning schulze.

Anyone would like to have this combo can shoot me PM, I have spare one.