RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#5)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
05.02.2008, 02:51 PM

Depending on usage the clutch can get hot, especially if you are trying to drive slowly, or have a tight bashing area that does not aloow you to get up past half throttle or so.

I have one in a revo, and another in a yusa rally. The revo is fine with the clutch, but it is somewhat strange to drive. I used the clutch in the yusa due to necessity, it was before mike had the 2 speed adapter, and the size of the clutch allowed me to place the motor far enough back to clear the mech disk brake. I use a 3 shoe integy al setup in the yusa and the stock traxxas shoes in the revo. The clutch only gets really hot during break in if you use brand new shoes. After a few mins it cools down.

I am not sure how well it would work in the heavy muggy. Stock muggy users have issues with the clutches not holding up from what I have seen/heard...
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com