Kyosho gears

I will be using 4s most of the time and i would like to have as tall of gearing as temps will allow. I found a 50T HB Lightning spur that might work.

[pb4ugo]

Originally Posted by Fast5sRevo88

I will be using 4s most of the time and i would like to have as tall of gearing as temps will allow. I found a 50T HB Lightning spur that might work.

I'm telling ya, I don't think it will be fast enough for you. Plug it into Brian G's speed calculator. I don't remember the results when I did, but it seems like my truck is pushing 35 with the tall gearing I have. Again, I'm running 46/15.

Would 46/17 be good in my CRT?

What kv of your motor you said 4s whats your tire size. have you punched it into speed calculator remeber crt is geared same as buggy
I punched in with a 2000kv rateing and 5.6" tires its says approx speed of 55mph

My motor is a Nemesis from FDMbefore i knew about RCM, anyway i think it is comparable to a 9 or 10XL. The tire measurement sounds about right.

[lincpimp]

Originally Posted by Fast5sRevo88

My motor is a Nemesis from FDMbefore i knew about RCM, anyway i think it is comparable to a 9 or 10XL. The tire measurement sounds about right.

Which nemesis is it? xlt 1 2 or 4?

That is going to be important for anyone to recommend a pinion...

sorry about that, it is an XLT-4