what is this?

[lutach]

Originally Posted by Revracer

ok so what is this and is it worth getting? im using a mamba max in a revo and a little more punch could always be used. thanks in advance

http://cgi.ebay.com/Ultra-low-ESR-Hi...QQcmdZViewItem

They are good. You could make your own as well and save a few bucks. Thos are the same that comes with the Hobbywing, Speed Passion GT and Venom 120A controllers.

[jhautz]

Originally Posted by lutach

They are good. You could make your own as well and save a few bucks. Thos are the same that comes with the Hobbywing, Speed Passion GT and Venom 120A controllers.

So you have tried these? What is the voltage on the capacitors? 25V, 35V?

[lutach]

Originally Posted by jhautz

So you have tried these? What is the voltage on the capacitors? 25V, 35V?

No, the actual capacitor that came with my Hobbywing is the old single capacitor that later got replaced by that capacitor bank http://www.hobbywing.com/english/Art...?ArticleID=417. The caps are rated for 16V and it is meant for 11.1 volts which is what Revracer will be using with his MM and Mega. Like I said in my previous post, it will actually be cheaper to make your own. I will be making my own using axial capacitors to have them lay flat instead of making them tall with the radial caps. I'll be using big 1000uF, 50V caps just because I have them here with me.