 |
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 463
Join Date: Aug 2005
Location: Malaysia
|
06.09.2008, 08:58 PM
Well, the MMM has been run beyond the 1 hr mark with minor mod to the fan. Removed the lead from the esc & plugged it into the receiver. Also using a UBEC to power everything. So far, so good. The fan is mounted in the front of the buggy above the steering servo with 1 hole offset to the rear of the esc. I.e. no hole in the shell directly above the esc. With this configuration, after an hr of running hard around the track, esc was 10 deg C above ambient with fan. More tests this weekend...
Regards, Joe Ling 
|
|
|
|
 |
 |
 |
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
